Mercury Survey for Ship Recycling: What the IHM Misses

When people talk about mercury and the Inventory of Hazardous Materials (IHM), the conversation usually turns to thermometers, gyro compasses and fluorescent tubes. Those matter. But on a tanker or an FPSO, the mercury that causes the most trouble at the end of a ship's life often isn't in any piece of equipment at all. It sits in the tanks, the scale and the sludge, left behind by years of cargo.

With the Hong Kong Convention now in force, it is worth looking at both sides of the question before a ship heads for recycling.

Why mercury matters more since June 2025

The Hong Kong International Convention for the Safe and Environmentally Sound Recycling of Ships entered into force on 26 June 2025. It applies to ships of 500 gross tonnage and above flying the flag of a Party, and its definition of "ship" expressly includes FSUs and FPSOs.

From that date, any ship going for recycling needs an International Ready for Recycling Certificate. New ships need an International Certificate on Inventory of Hazardous Materials, and existing ships must have one by 26 June 2030, or before going for recycling if that comes first.

Ships calling at EU ports have had to deal with this for longer. Under the EU Ship Recycling Regulation, non-EU-flagged ships calling at an EU port or anchorage have needed an IHM on board since 31 December 2020, and mercury and mercury compounds are among the materials listed in Annex II of the Regulation.

Where the IHM looks for mercury

The IMO's 2023 Guidelines for the Development of the IHM (resolution MEPC.379(80)) split the inventory into three parts:

  • Part I: materials contained in the ship's structure or equipment
  • Part II: operationally generated wastes
  • Part III: stores

Part I: mercury in structure and equipment

Mercury and mercury compounds appear in Table B of the Guidelines, which mirrors Appendix 2 of the Convention. The threshold value is 1,000 mg/kg, measured in the homogeneous material. The Guidelines list typical sources such as fluorescent lights, mercury lamps, liquid-level switches, gyro compasses, thermometers, pressure sensors, electrical switches and fire detectors.

For existing ships, listing Table B materials in Part I is not obligatory. The Guidelines say they should still be listed if they can be identified in a practical way, because recycling yards rely on that information.

Part II: mercury in operational waste

Once the decision to recycle has been taken, Part II must be developed before the final survey. It covers wastes that will be delivered with the ship to the recycling facility, including waste oil (sludge), oily liquid cargo tank residues, oily solid cargo tank residues and fuel tank residues. Their approximate quantities and locations should be listed.

This is where a mercury question often goes unasked. The Convention also requires a ship destined for recycling to minimise cargo residues, fuel oil and wastes remaining on board (regulation 8.2, referenced in the Guidelines), so tank cleaning and waste planning usually happen at the same stage.

The cargo tank gap

Mercury occurs naturally in oil and gas reservoirs. UNEP notes that it is found in almost all of them, and that concentrations in production fluids can range from below parts per billion to parts per million. It can react and accumulate on process infrastructure over time. OCIMF has published guidance for tanker operators on handling crude cargoes with elevated mercury for the same reason.

For a ship manager, the practical result is that tank scale, sludge and pipework on a crude tanker, product tanker or FPSO may carry mercury, regardless of what the equipment list in Part I says. An IHM built mainly from equipment records and material declarations may not show it.

That matters for three reasons:

  1. Worker safety. Mercury vapour can be released when contaminated steel or residues are heated, cut or disturbed. The IMO's ship recycling guidelines (MEPC.210(63)) treat heavy metals, including mercury, as something the yard must plan to remove, store and treat.
  2. Waste classification. Under the Minamata Convention, Parties agreed in 2023 on a threshold of 15 mg/kg total mercury for wastes contaminated with mercury, although a Party may use a different documented approach. That is a waste threshold, separate from the 1,000 mg/kg IHM threshold for products, so the two shouldn't be confused.
  3. Yard planning. The recycling facility uses the IHM to prepare its plan. If mercury turns up unexpectedly, it can mean delays, renegotiation or residues with no agreed disposal route.

What a mercury survey involves

A mercury survey for a vessel heading to recycling, lay-up or sale typically combines:

  • Vapour readings in tanks, pump rooms and enclosed spaces, taken with direct-reading instruments once the space has been gas-tested and is safe to enter.
  • Scale, sludge and swab sampling from tank surfaces, bottoms and pipework, chosen to represent different tanks and cargo histories.
  • Laboratory analysis of the samples. The IHM Guidelines distinguish quick "indicative" field tests from "specific testing", and recommend specific testing where results might be disputed.
  • A written report setting out sample locations, results and what they mean for the IHM, the waste route and the work plan.

The survey doesn't replace the IHM or its verification by the flag Administration or a recognised organisation. It gives the IHM expert, the owner and the yard better information to work from.

When to do it

The most useful time is before the tanks are cleaned for the last time and before Part II is finalised. Results can then shape how the tanks are cleaned, how residues are segregated and where they go. Our hazardous waste management page explains how mercury-bearing scale and sludge are documented and sent to licensed facilities, and our ship recycling page covers the wider end-of-life preparation.

If waste has to cross a border, the Basel Convention's technical guidelines on mercury wastes and the transboundary movement controls also come into play, so it helps to know the mercury content well before anything moves.

Frequently asked questions

Is mercury mandatory in the IHM for an existing ship?

Mercury is a Table B material. For existing ships, listing Table B materials in Part I is not obligatory, but the IMO Guidelines say they should be listed where they can be identified in a practical way. Operationally generated wastes are listed in Part II once the decision to recycle is made.

What is the mercury threshold for the IHM?

The IMO 2023 IHM Guidelines set a threshold of 1,000 mg/kg for mercury and mercury compounds in homogeneous materials. Waste classification follows separate rules, such as the 15 mg/kg threshold adopted under the Minamata Convention and national law.

Does a gas-free certificate mean the tank is free of mercury?

No. Gas-freeing checks for oxygen, flammable and toxic gases. Mercury vapour and mercury in scale or sludge need their own measurements and sampling.


Planning a sale, lay-up or last voyage? Email dchapman@enviroforce.com or call +65 9054 0100 to scope a mercury survey for your vessel.

Sources

Next
Next

The Rise of Methanol in Green Shipping: Preparing Vessels with Advanced Corrosion Management